RYOBI Tools

A while back we built a different bar/console table for a friend and it has been a huge hit whenever they entertain. Essentially, it is console table that goes behind a sofa that can house four counter height stools and is the perfect for hosting! 🏈 🍺

Tools

18V ONE+ HP Brushless Jig Saw
18V ONE+ 7-1/4" Sliding Compound Miter Saw
18V ONE+ 5" Random Orbit Sander
18V ONE+ HP Brushless 4-Mode 1/4" Impact Driver
18V ONE+ HP Brushless 1/2" Drill/Driver

Accessories

10 PC. ALL-PURPOSE JIGSAW BLADE SET
31 PC. Drilling and Driving Accessory Kit
7 PC. 5" RANDOM ORBIT SANDER SAND PAPER

Materials

(2) 2"x2"x8'
(2) 4x4x8 Posts
(4) 2"x4"x8'
2-1/2" Pocket Screws
Pocket Hole Jig
Wood Glue
Wood Stain

Steps

STEP 1

Cut all pieces of wood using the attached cut list. Drill pocket holes and assemble the 2 sides with 2-1/2" pocket screws.

Tools

Drill, Impact Driver, Miter Saw

assembling the base

STEP 2

Drill pocket holes and assemble the base with 2-1/2" pocket screws.

Tools

Drill, Impact Driver

assembling base

STEP 3

Drill pocket holes and assemble the top with 2-1/2" pocket screws.

Tools

Drill, Impact Driver

assembling the top of the table

STEP 4

Set the top on the base and mark the cutouts for the 4x4 posts. Then cutout notches for the posts and sand to refine corners.

Tools

Jig saw, Orbit Sander

marking the cutouts

STEP 5

Drill pocket holes and install the top piece using 2-1/2" pocket screws.

Tools

Drill, Impact Driver

attaching top