Steps
STEP 1
Measure and mark the middle of the candle. Place designs on tracing paper and tape to the candles. Trace out the designs on the candle with a pencil, then peel off the tracing paper.
Tools
Tape Measure
Materials
Pencil, Pillar Candle, Tracing Paper
![](https://2e1293630802db8d0d56-50fcdb1c10e3e49a3d1b0541a2f13b69.ssl.cf1.rackcdn.com/projects/steps/070395b4416443d7bd41e517e1aae71a.png)
STEP 2
Insert the v-gouge blade into the USB Lithium Power Carver. Carefully carve out the full design on the candle.
Tools
Power Carver, V-Gouge Blade
![](https://2e1293630802db8d0d56-50fcdb1c10e3e49a3d1b0541a2f13b69.ssl.cf1.rackcdn.com/projects/steps/af4f85b5f9cd4a6e8ce93c6353260f5a.png)
STEP 3
Use the gold paint pen to fill in the carved out design in the candle.
Materials
Gold Paint Pen, Pillar Candle
![](https://2e1293630802db8d0d56-50fcdb1c10e3e49a3d1b0541a2f13b69.ssl.cf1.rackcdn.com/projects/steps/ff915bc266fe45ee95cdf98dbb7446e6.png)