Steps
STEP 1
Cut out all material using the Lumber & Sheet Cut Layout Guide. Drill the holes as indicated on Page 5.
Tools
![Cutting wood](https://2e1293630802db8d0d56-50fcdb1c10e3e49a3d1b0541a2f13b69.ssl.cf1.rackcdn.com/projects/steps/2e2df0f68acf433a89460e7c0825110f.png)
STEP 2
Align the 11-1/4” side panels to the 20” back panel as shown in the diagram. Make sure the side panel with the hole is on the right. Glue and nail from the backside.
Tools
![Nailing wood](https://2e1293630802db8d0d56-50fcdb1c10e3e49a3d1b0541a2f13b69.ssl.cf1.rackcdn.com/projects/steps/66eec86632af463dac6ffff9882fdfdc.png)
STEP 3
Align the lower drawer support 2-1/2” from the bottom. Glue and nail together.
Tools
![Nailing wood](https://2e1293630802db8d0d56-50fcdb1c10e3e49a3d1b0541a2f13b69.ssl.cf1.rackcdn.com/projects/steps/1fecff8b774442748d112a240f2ec1c1.png)
STEP 4
Align the upper shelf 6-7/8” from the bottom. Attach with glue and nail together.
Tools
![Nailing wood](https://2e1293630802db8d0d56-50fcdb1c10e3e49a3d1b0541a2f13b69.ssl.cf1.rackcdn.com/projects/steps/09151b91003c40d2bf0c97e5dcb4b741.png)
STEP 5
Slide the other end of the 3/8” dowel into the hole on the side panel.
Tools
![Nailing wood](https://2e1293630802db8d0d56-50fcdb1c10e3e49a3d1b0541a2f13b69.ssl.cf1.rackcdn.com/projects/steps/6756d65aba8c43feb731549e6cd6cee1.png)
STEP 6
Slide the other end of the dowel into the hole of the partition board. Glue and nail the partition board 9-1/2” from the ride side.
Tools
![Nailing wood together](https://2e1293630802db8d0d56-50fcdb1c10e3e49a3d1b0541a2f13b69.ssl.cf1.rackcdn.com/projects/steps/da1a94d5d5f9407e9a702032cdd8c6e4.png)
STEP 7
Measure 3” from the back board as shown in the diagram. Glue the divider to the bottom and side
Tools
![Attaching divider](https://2e1293630802db8d0d56-50fcdb1c10e3e49a3d1b0541a2f13b69.ssl.cf1.rackcdn.com/projects/steps/c9e64d21ad23447d865cddd8f0c0c18d.png)
STEP 8
Add the second partition along the divider. Glue and nail the partition to the back and bottom.
Tools
![Nailing wood](https://2e1293630802db8d0d56-50fcdb1c10e3e49a3d1b0541a2f13b69.ssl.cf1.rackcdn.com/projects/steps/51b5b9f742cf4eda86ccf5135bdc0c59.png)
STEP 9
Using the router and a 1/2” straight bit, cut a 1/4” x 1/4” rabbit into one edge of the drawer panels. The rabbit will be located at the bottom inside edge.
Tools
![Routing the wood](https://2e1293630802db8d0d56-50fcdb1c10e3e49a3d1b0541a2f13b69.ssl.cf1.rackcdn.com/projects/steps/32b760ffb0ce44a3b0a611ee506ba3b2.png)
STEP 10
Align both side panels to the drawer bottom. Glue and nail together.
Tools
![Nailing wood](https://2e1293630802db8d0d56-50fcdb1c10e3e49a3d1b0541a2f13b69.ssl.cf1.rackcdn.com/projects/steps/e8d8f7873bac448d8aa9cae4917a6b94.png)
STEP 11
Align the front and back panels to the drawer bottom. Glue and nail together.
Tools
![Nailing wood](https://2e1293630802db8d0d56-50fcdb1c10e3e49a3d1b0541a2f13b69.ssl.cf1.rackcdn.com/projects/steps/e0c0b24f121e4174b9d8f3c909f0c3e3.png)
STEP 12
Sand the cabinet and drawer.
Tools
![Sanding wood](https://2e1293630802db8d0d56-50fcdb1c10e3e49a3d1b0541a2f13b69.ssl.cf1.rackcdn.com/projects/steps/b871c0c3cf594ed1a3909df06732ff9b.png)
STEP 13
Add handle to the drawer.
Tools
![Drilling hole for handle](https://2e1293630802db8d0d56-50fcdb1c10e3e49a3d1b0541a2f13b69.ssl.cf1.rackcdn.com/projects/steps/5ebf5c6a969d4486add1a22d54be923a.png)