Steps
STEP 1
Up-cycle any unused foam if able. (The example is an old boogie board). Cut foam to desired size and shape.
![Boogie board](https://2e1293630802db8d0d56-50fcdb1c10e3e49a3d1b0541a2f13b69.ssl.cf1.rackcdn.com/projects/steps/b7a33222f5bb484aa0005fc8d4459291.png)
STEP 2
Trace out a template on the board. Carve out the template into the foam board.
Tools
Power Carver
Materials
Foam
![Carving foam](https://2e1293630802db8d0d56-50fcdb1c10e3e49a3d1b0541a2f13b69.ssl.cf1.rackcdn.com/projects/steps/726813417c6644c79814b57cdda842be.png)
STEP 3
Apply paint to the tombstone. Allow the paint to dry.
Tools
Light
Materials
Foam, Paint
![Painting foam](https://2e1293630802db8d0d56-50fcdb1c10e3e49a3d1b0541a2f13b69.ssl.cf1.rackcdn.com/projects/steps/f985d034b1bc4e8cae28f6e2fbf84b8b.png)
STEP 4
Trim a metal H-frame wire stake to desired size.
Tools
Multi-Tool
Materials
Metal H Frame Wire Stake
![Trimming wire](https://2e1293630802db8d0d56-50fcdb1c10e3e49a3d1b0541a2f13b69.ssl.cf1.rackcdn.com/projects/steps/1edc8efd1e9841eab216ea8a57bdc23a.png)
STEP 5
Insert the metal H-frame wire stake into the finished foam tombstone piece.
![Foam tombstone](https://2e1293630802db8d0d56-50fcdb1c10e3e49a3d1b0541a2f13b69.ssl.cf1.rackcdn.com/projects/steps/04e49b2fae164815b5d3bb159ff21d1b.png)