Steps
STEP 1
Carve a divot into a piece of wood deep enough to hold a metal hoop.
Tools
Power Carver
![carving the wood](https://2e1293630802db8d0d56-50fcdb1c10e3e49a3d1b0541a2f13b69.ssl.cf1.rackcdn.com/projects/steps/92b201dd38da47509382ade78145c6b9.png)
STEP 2
Use a cone shaped accessory to refine the groove made in the previous step.
Tools
Rotary Tool
![Refining the groove](https://2e1293630802db8d0d56-50fcdb1c10e3e49a3d1b0541a2f13b69.ssl.cf1.rackcdn.com/projects/steps/daee4acd7cb844f887d56aa64e566162.png)
STEP 3
Engrave a heart shape onto the side of the wood piece.
Tools
Rotary Tool
![Engraving a heart](https://2e1293630802db8d0d56-50fcdb1c10e3e49a3d1b0541a2f13b69.ssl.cf1.rackcdn.com/projects/steps/31dbf0fce1404d55990deccb700435fa.png)
STEP 4
Apply hot glue to the groove where the metal hoop will go.
Tools
Glue Pen
![adding hot glue](https://2e1293630802db8d0d56-50fcdb1c10e3e49a3d1b0541a2f13b69.ssl.cf1.rackcdn.com/projects/steps/fb83d8a9218f48e2907394b7186ef901.png)
STEP 5
Press the metal hoop into the hot glue.
![pressing the hoop into the glue](https://2e1293630802db8d0d56-50fcdb1c10e3e49a3d1b0541a2f13b69.ssl.cf1.rackcdn.com/projects/steps/af0acce664d641e58185f1db7a530b7a.png)
STEP 6
Wrap twine around the middle of the hoop using hot glue.
Tools
Glue Pen
![](https://2e1293630802db8d0d56-50fcdb1c10e3e49a3d1b0541a2f13b69.ssl.cf1.rackcdn.com/projects/steps/06d4155c129047d4bd52d46c9b6d90f4.png)
STEP 7
Thread dried flowers in between the rows of twine.
![threading dried flowers through the twine](https://2e1293630802db8d0d56-50fcdb1c10e3e49a3d1b0541a2f13b69.ssl.cf1.rackcdn.com/projects/steps/0bcb8158fdf54a6990789b495b7e2049.png)