Steps
Step 1
Attach painters tape around where the spoon portion ends. Paint both the spoon handle and a swipe of paint on glass jars and allow the paint to dry.
Materials
![Taped off wooden spoons](https://2e1293630802db8d0d56-50fcdb1c10e3e49a3d1b0541a2f13b69.ssl.cf1.rackcdn.com/projects/steps/eb4eec695eaf45038c03de878b45c10b.png)
Step 2
Attach the word stencils with tracing paper on the spoon handles and on the glass jars. Trace along the letters with a pencil, then remove tracing paper.
Materials
![Tracing stencils](https://2e1293630802db8d0d56-50fcdb1c10e3e49a3d1b0541a2f13b69.ssl.cf1.rackcdn.com/projects/steps/624aadb383ca4af5a9e042c7949f40fa.png)
Step 3
Insert the ball engraving burr into the 18V ONE+ Precision Craft Rotary Tool and start with a low speed for increased control. Carefully engrave along the letters until fully engraved into the spoons.
Tools
Materials
![Engraved wooden spoon](https://2e1293630802db8d0d56-50fcdb1c10e3e49a3d1b0541a2f13b69.ssl.cf1.rackcdn.com/projects/steps/a1d785c45879407d8a850c246568506c.png)
Step 4
Insert the Diamond Tip Engraving Eurr and set the speed to low to start. Carefully etch the letters into the glass.
Tools
Materials
![Engraved glass jar](https://2e1293630802db8d0d56-50fcdb1c10e3e49a3d1b0541a2f13b69.ssl.cf1.rackcdn.com/projects/steps/2930d88dc1124d22962716242a0389f2.png)
Step 5
Use the USB Lithium Power Cutter to cut three pieces of twine to desired length. Double wrap a piece of twine around each jar and tie a bow in the front. Fill each jar with desired ingredients.
Materials
![Cutting twine](https://2e1293630802db8d0d56-50fcdb1c10e3e49a3d1b0541a2f13b69.ssl.cf1.rackcdn.com/projects/steps/5956593f75d24901ae18bbb938644f7a.png)