La ingleteadora combinada deslizable de 10" y 15 A con láser cuenta con 9 posiciones de corte predeterminadas con mecanismo de detención para cortes precisos. Tiene una hoja de carburo dentada de 10" para lograr un corte suave y un freno eléctrico que detiene la hoja rápidamente para mayor seguridad. La sierra trae un láser EXACTLINE™ que ofrece una guía para cortes. También trae una mesa extensible para brindarle un mejor soporte cuando esté trabajando con piezas grandes.
- Motor de alta resistencia de 15 A para cortar materiales grandes fácilmente
- El cabezal de deslizamiento brinda la máxima capacidad para cortes cruzados de hasta 12"
- Posiciones de corte ubicadas en los ángulos de moldura de corona más comunes: 0º, 15º, 22.5º, 31.6º y 45º a la izquierda y a la derecha, para cortar rápidamente
- El sistema ajustable de alineación láser EXACTLINE™ alinea en forma precisa la hoja y la línea de corte, y tiene una fuente de energía interna (no requiere baterías)
- El inglete extendido tiene un rango que va desde los 45° a la izquierda hasta los 50° a la derecha para ofrecerle una amplia variedad de cortes
- El control manual de detención del inglete proporciona una palanca de rápida acción para detenerlo con un movimiento simple
- Escala de corte en inglete mecánica para una alineación precisa de la mesa
- El puerto de escape fijo de 1-1/4" brinda una conexión a sistemas de recolección de polvo y optimiza el rendimiento de estos para cortes profundos y deslizables
- Mango horizontal en forma de "D" para mayor comodidad
- Motor: 120 V, ~ 60 Hz, 15 A - Velocidad del motor: 5,500 r/min (rpm)
- Puerto de escape: 1-1/4"
- Diámetro del eje: 5/8"
- Diámetro de la hoja: 10"
- Corte ingleteado a 90º: 1-1/2” x 12” y 3-1/2" x 3-1/2"
- Corte ingleteado a 45º: 1-1/2” x 7-1/4”
- Ingleteadora combinada TSS102L con láser y hoja de carburo dentada
- (2) mesas extensibles
- Llave para hoja
- Bolsa recolectora de polvo
- Manual del usuario
Ingleteadora combinada deslizable de 10" con láser
Ingleteadora combinada deslizable de 10" con láser con calificación sobre 5 por 163.
Calificación de 3 sobre 5 por Matt Omaha de Good but with one issue. For the price, this is a very good saw. The slide mechanism isn't extremely smooth. And I ended up returning it because the blade could not reach the bottom back part of square boards. Typical lumber with rounded corners worked fine. But if you had a square board it would not cut all the way through. Then it would splinter. I tried to adjust the fence forward, but it was already maxed out. To be fair, I had put on a new Dewalt 10" blade. So it's possible the blade it came with would cut all the way through, but I didn't bother testing that. I want the flexibility of using different blades.
Fecha de publicación: 2019-04-29
Calificación de 5 sobre 5 por Blake de Good saw for the money I’ve had this saw a few months and I will say I do like it. It took a little adjustment to get it to cut just the way I wanted but it was nothing a screw driver and a pair of pliers couldn’t fix. It’s very easy to use, saw cuts smooth as butter when especially when it is fixed to a work bench with a fresh sharp blade. The motor has plenty of power, tears through 4x4’s with ease. The dust collector bag works well but the surrounding areas will still get dusty so keep that in mind when choosing a place to set up. Overall it’s a great saw, I bought this one for $129 on sale at my local Home Depot and I’ve already got my money’s worth.
Fecha de publicación: 2019-05-15
Calificación de 5 sobre 5 por Paul S de Great Saw Great saw, I used it right away with ease. Built a work bench and storage shelves. Now on to more projects.
Fecha de publicación: 2018-06-05
Calificación de 4 sobre 5 por anestis de Great saw with some minor flaws I purchased this saw about a year and a half ago and have used it for multiple projects. It cuts great and I love the sliding arm. But, I haven't had good luck with adjusting the laser guide. So I made a zero clearance insert for the arm and an auxiliary fence. Each one has a cut that I use to locate the kerf when making straight cuts. Also, I found that the fence was difficult to adjust. But, eventually I managed to adjust it but taking it completely off, cleaning some oil residue from the fence and the saw surface, and reassembling it. Overall, it's a pretty good performing saw for the money.
Fecha de publicación: 2019-10-06
Calificación de 4 sobre 5 por Bobr de Missing set screws and holes for clamp Great saw for the money but mine is missing all the set screws for the clamp and no holes were drilled for it. Had to drill my own.
Fecha de publicación: 2018-04-15
Calificación de 4 sobre 5 por Nick from HB de 10" Sliding Compound Miter Saw Out of the box the saw seems to be put together very well. It was out of square both vertically and horizontally, so I had to adjust the stops. After getting everything square, I went to move the small pointer on the tilt head which shows the angle to align it with the zero and it cracked (it is just thin plastic). My only other complaint thus far is the included clamp, which is really finicky to get set up since it's just a knurled shaft that fits in a sleeve on the back side of the fence. Very odd. Overall though, this saw works very well and I'm excited to get more chances to use it.
Fecha de publicación: 2019-05-06
Calificación de 5 sobre 5 por Grantwass33 de Excellent Product that I use all the time! I was hesitant to buy this chop saw as it was my first Ryobi product and I had a negative connotation that their tools were "cheap." After doing additional research, and checking out competitor items, I found that the Ryobi was just as stout and seemingly durable as competitors, but significantly lower cost. So I took the gamble, saved over $100 v other brands, and could not be happier. I have used this thing to cut everything from small finish wood to a 6" pressure treated post. I absolutely love it. I am not a contractor and use it for smaller home projects, but put it through it's paces while building a deck and an additional set of "deck stairs" where I was cutting a lot of pressure treated lumber.
Fecha de publicación: 2020-10-30
Calificación de 4 sobre 5 por cdl1 de Nice features I was looking to buy a new 10 inch mitre saw to replace my 22 year old Delta one. I was researching different ones and decided on the Ryobi 10 inch sliding mitre saw. It had all the same features just not the big price tag. I’m sure there’s better ones, but for the weekend warrior like myself, it’s works perfectly fine. I took it out of the box and didn’t have to adjust anything as it cut perfect. I checked the mitres with a digital mitre gauge and they were bang on. Couldn’t be happier
Fecha de publicación: 2019-07-06