Clavadora de acabado en ángulo ONE+™ AirStrike™ de calibre 15 y 18 V

Modelo # P330

4.6 | 95 reseñas
El sistema RYOBI® ONE+™ de 18 V presenta la última incorporación a la familia de herramientas RYOBI AirStrike™: la clavadora de acabado en ángulo ONE+™ de 18 V. Esta clavadora de acabado en ángulo de calibre 15 posee tecnología AirStrike™, que elimina la necesidad de compresores ruidosos, mangueras voluminosas o cartuchos de gas costosos. Esto se traduce en una instalación más rápida y mayor maniobrabilidad en el sitio de trabajo o en la casa. Entre las aplicaciones comunes para esta herramienta se incluyen: moldura de corona, colocación de puertas y peldaños, y molduras exteriores. Realice prácticamente cualquier trabajo de terminación, con capacidad para clavar hasta 750 clavos por carga, usando la batería de alta capacidad P108 LITHIUM+™ de 4 Ah (se vende por separado). La clavadora de acabado en ángulo AirStrike™ funciona con cualquier batería ONE+™ de 18 V de RYOBI (se vende por separado). La línea AirStrike™ incluye la clavadora ONE+™ de 18 V (P320), la grapadora de corona angosta ONE+™ de 18 V (P360) y la clavadora de acabado recto ONE+™ de 18 V.

Características

Logo de la garantía por tres años de Ryobi

Este producto está cubierto por una garantía de 3 año.

El sistema ONE+ de 18 V de RYOBI incluye más de 175 productos exclusivos que le ofrecen lo último en versatilidad y opciones para hacer todos sus trabajos. 

Vea nuestro catálogo actual para conocer los nuevos lanzamientos y últimas ofertas de RYOBI.

Ryobi Ayuda+

Su lugar para ver consejos y técnicas, manuales, detección de problemas, preguntas frecuentes y más.

Especificaciones

  • Batería: 18 V
  • Calibre de clavos: clavos de terminación calibre 15
  • Capacidad del alimentador: 105 clavos de terminación
  • Largo del clavo: 1” a 2-1/2”
  • Clavos por carga usando la batería P108: 750
  • Unión del sujetador: tira de pegamento
  • Peso de la herramienta: 6.8 lb

Incluye

  • Clavadora de acabado en ángulo P330
  • (500) clavos de terminacioón en ángulo de 2", calibre 15
  • Sujetador para cinturón
  • Manual del usuario

Reseñas

Clavadora de acabado en ángulo ONE+™ AirStrike™ de calibre 15 y 18 V
Clavadora de acabado en ángulo de calibre 15 ONE+™ AirStrike™ de 18 V con calificación 4.6 sobre 5 por 95.
Calificación de 5 sobre 5 por de I based my entire cordless buy on Airstrike Many start with a drill/driver or a tool bundle to establish an 18V system to build on. I started with nailers. I needed a finish and brad nailer and was pleasantly surprised to find 18V ones up to 15ga. I am very happy with all the nailers in the Ryobi range and they are consistently rated better than the Yellow and Red brands. I like the fact that it is still pneumatic, light, no kickback. The angled mag allows reach into tight spaces. As for the rest of their system, they are good homeowner level tools priced lower than most other name brand tools.
Fecha de publicación: 2020-01-20
Calificación de 5 sobre 5 por de Gets the Job done. I picked this Ryobi angle finishing nailer from Home Depot. I had been researching for a while for a cordless finishing nailer.This 15 gauge fit the bill. I wanted something strong with a big bite into the wood that was gonna hold my wood together. Also something that will fit into tight corners.While having other Ryobi tools, the battery platform for this tool only buy works great for me. When I do my Google search to compare tools reliability this nailer came in the top 10 all over Google searches. I would recommend this tool anyone that's looking for a angle finishing nailer to get the job done without any problems.I would definitely buy this tool again.
Fecha de publicación: 2020-12-21
Calificación de 5 sobre 5 por de Very handy finishing nailer I really like the convenience and power of this nail gun. It's much easier than pulling out my pneumatic gun and compressor. The built in compressor in the gun is very clever and it works great. This is actually my third gun. The first gun jammed often right after I got it so I returned it to the store. The second gun worked fine for a while then the striking pin would stick and I had to drive it back into the gun. The striking pin finally broke. I called Ryobi customer service to explain the problem and they sent out a new one right away. So far this gun is working fine.
Fecha de publicación: 2019-06-21
Calificación de 1 sobre 5 por de Failed after 2 uses Failed after 2 uses, sames as another reviewer, makes a hickup noise and no longer fires nails. Only used it for one project (finished trim on a shed) and failed halfway through the second project (building a raised garden bed)... so far impossible to contact ryobi for tool service (website errors and absolute trash phone contact) and have only owned this product for 9 months. way too expensive to last less than a year. I own MANY Ryobi tools and this one is dissapointing.
Fecha de publicación: 2020-04-24
Calificación de 1 sobre 5 por de First failing tool from Ryobi, for me! Today I attempted to use this product and it is just not firing. I use the P330 maybe 1x a month if that! the battery is fully charged and all it does is sound like it has the hiccups. The frustrating thing about this is this is the 4th one i have bough in less than 3 years! thats insane! they seem to last for a few months and then just have issues. I just cant call this nailer a good product based on the amount of times I have had issues with it.
Fecha de publicación: 2019-03-18
Calificación de 5 sobre 5 por de Performed Well in Several Projects So Far This is my first cordless nailer and it has been a great experience. My first project was relatively small, a wooden base for a gas fire pit. I used it to trim out and it performed remarkably. I appreciate how quiet the tool is without the overbearing air compressor running. It offered plenty of power and was easy to control the nail depth with the onboard adjustment. I used a 2 AH battery, and albeit my projects have been smaller, the tool never wavered in power. I did have one jam in like 200+ nails, but the mechanism to clear jams was simple. To Ryobi's defense, I did use the cheapest finish nails possible from a discount competitor (HF), so maybe I would not have had this issue with a better quality nail. But still, it performed exceptionally and I am happy with my purchase.
Fecha de publicación: 2020-10-15
Calificación de 5 sobre 5 por de Awesome tool Great finish nailer ,versitile, very easy to handle ,beats dragging air hose ,well built, can take a 6ft drop lol, 4aH battery drives about 800 nails, im currently putting in 2600 ft of 6 & 8 inch V match pine so all of my Ryobi woodworking are being gainfully employed on this project
Fecha de publicación: 2019-04-20
Calificación de 2 sobre 5 por de Great tool cause no hose compressor or fuel. Shoots small nails fine but 2 1/2 in 15 ga nails won’t shoot all the way in 1/2 in baseboard. Have to nail set every one. Battery fully charged and depth gage set all the way in still won’t set them. My only complaint
Fecha de publicación: 2019-05-30
  • y_2021, m_5, d_3, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.15
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_95
  • loc_en_US, sid_205792768, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_ryobi-tools

Asistencia