El limpiador de superficies de 2300 psi y 12" de RYOBI es la opción ideal para superficies duras, como entradas de autos, patios, aceras y mucho más. Este práctico accesorio para lavadoras a presión limpia hasta 4 veces más rápido que una boquilla estándar, con chorros giratorios que le brindan una proyección de limpieza amplia y libre de manchas. El limpiador trae un adaptador de conexión rápida de ¼" que se acopla fácilmente a su lavadora a presión, para que pueda moverse más rápido entre cada trabajo. El limpiador de superficies eléctrico de 2300 psi y 15" de RYOBI es compatible con casi todas las lavadoras a presión eléctricas con hasta 2300 psi.
Limpia 4 veces más rápido que una boquilla estándar
Limpieza de superficies libres de manchas
Chorros de agua de alta presión con rotación doble
Se acopla fácilmente con una vanda rociadora de conexión rápida de 1/4"
- Presión máxima: 2300 psi
- Flujo máximo: 1.4 gpm
- Diámetro: 12"
- Tipo de conexión: conexión rápida de 1/4"
- Limpiador de superficies de 2300 psi y 12"
- Manual del usuario
Limpiador de superficies de 12" para lavadora a presión eléctrica
Limpiador de superficies de 12" para lavadora a presión eléctrica con calificación sobre 5 por 166.
Calificación de 5 sobre 5 por mpoptc de Great Performance The unit does a great job on my driveway and patio area. Cut the time down by more than half.
Fecha de publicación: 2021-02-27
Calificación de 3 sobre 5 por Jackie Blue de Works somewhat but rather flimsy I bought this along with my pressure washer a month ago. Attempted to use it to clean my driveway, however my driveway had not been pressure washed in about 10 years and was extremely dirty. Unfortunately, debris got into the rotational collar and it began to slow up and not clean well...then jammed. Nothing more frustrating than to have to stop and take this apart, clean it and reassemble it so you could complete the job. I lost hours working on this and ended up going back to my turbo head to finish the job...it, too, jammed due to debris clogging it. This particular surface cleaner seems to be a waste of my money.
Fecha de publicación: 2020-06-17
Calificación de 5 sobre 5 por Jkelley49 de Good surface cleaner I tried this Ryobi unit after buying and using the non-ryobi EZ Clean 15 inch unit for about 6 months. I'm very impressed with the Ryobi unit. Although it is smaller than the EZ clean unit (12" vs 15"), it does a much better job and is easier to use. It glides over the surface while the EZ clean has to be dragged around. When you lift each unit off the pavement about 6" the pressure coming out of the ryobi is much higher than the Ez Clean. I assume this is because the Ryobi is designed for 2300 psi max which matches the pressure of the Ryobe pressure washer I'm using, while the EZ Clean is designed for 2500 to 3300 psi. The Ryobi surface cleaner does a great job and I would highly recommend it.
Fecha de publicación: 2019-02-08
Calificación de 3 sobre 5 por KK B de A time saver, but.... I decided to try this out on my 2000 psi pressure washer. Considering only actual working time, I was able to wash a deck and a slab in the time usually required to wash just one of them. However, although I had cleared debris from the surfaces with the jet spray prior to using the surface cleaner, I had to stop and clean the nozzles several times. And eventually I just removed the filter as the water output decreased to an ineffective amount (and no replacements were carried in local Home Depot stores). Same experience cleaning a stone walkway. Will definitely keep using it but I’m happy I didn’t pay more.
Fecha de publicación: 2020-08-25
Calificación de 4 sobre 5 por Mike 1957 de Worked great until a leak developed I have used this cleaner several times and it worked great until yesterday when a leak developed on the stem that connects the spray bar to the disc. I removed the stem and found a broken o-ring. I have tried to get a part list and the part on line but have had no luck. The Ryobi web site states that the part list is not available and there are some o-rings available in the spare parts section but without a parts list how can i purchase the correct part. If I can get the dimensions of the o-ring I can purchase it from a different supplier. How can a parts list not be available?? Very disappointed!!
Fecha de publicación: 2020-10-13
Calificación de 1 sobre 5 por hienz1 de sprays out from plastic input shaft I got this included with the 2000 psi electric pressure cleaner, read all their instructions, hooked it up, and after only 5 minutes of use it's broken. It sprays water out the top, out of where the plastic input shaft pivots with the donut unit. I bought the pressure cleaner to use at home, (if I were to use one in a professional context, I would have gone with a gas-powered 6000 psi unit). See video. This particular product really needs to be redesigned. The plastic input shaft should be either metal tubing or at the very least reinforced carbon fiber, as it currently just doesn't cut it.
Fecha de publicación: 2020-05-30
Calificación de 5 sobre 5 por Eddy8157 de Works amazing!! As soon as I got it I put this baby to use! I’m a first time home owner and I’ve got a lot of projects in mind. So far I’ve washed my large deck with it, the cement in my patio, and my front porch. Im going to start working on my driveway, garage, and outside of my house. I love using this thing and it makes it go by so much faster. It’s amazing how huge of a difference this makes. I use this with my Ryobi 1600 psi pressure washer and man oh man I love it. I’ll be buying more Ryobi products as I need and can afford them. Great product, reliable and affordable. Highly recommend it!
Fecha de publicación: 2020-04-02
Calificación de 3 sobre 5 por CKmini de Does a good job when it works.. I bought the pressure washer & head together. I've used the cleaning head several times now. Spinning head works great and saves lots of time,, when it's spinning. While doing my driveway & sidewalk. About half way through it seemed to bog down the pressure washing unit and didn't have enough force to keep the head spinning. It starts & stops to the point of frustration. Pressure washer itself has worked flawlessly with the wand. So I assume it's the result of using the 12" head causing it to lose pressure. No tips or troubleshooting for this topic in the instructions or FAQ.
Fecha de publicación: 2020-05-20