-
-
-
+3 -
-
-
-
-
-
+3
-
-
-
Ryobi presenta la ingleteadora deslizable de 7-1/4". Esta ingleteadora es compacta y liviana, lo que la hace portátil y perfecta para trabajos de bricolaje en la casa. El motor de alta resistencia de 10 A proporciona hasta 5,350 rpm para realizar cortes difíciles o diversos cortes pequeños en madera. Cuenta con un puerto de escape de 1-1/4" para ayudar a mantener limpia el área de trabajo. La hoja de carburo de 40 dientes ofrece un mejor rendimiento para realizar cortes rápidos y perfectos, y cortes cruzados de hasta 2" x 10" nominal. Con el respaldo de la garantía de RYOBI por 3 años, la ingleteadora deslizable de {7-1/4" incluye una hoja de carburo de 40 dientes, una llave para hoja, una bolsa recolectora de polvo, una prensa, dos empuñaduras para transportarla y un manual de usuario.
Características
- Corte cruzado a nominal de 2" x 10"
- Biselado ajustable de 0° a 45°, izquierda
- Control manual de detención del inglete con un movimiento simple
- Posiciones de corte ubicadas en los ángulos de moldura de corona más comunes: 0°, 15°, 22.5°, 31.6° y 45°a la izquierda y a la derecha, para cortar rápidamente
- Escala de corte en inglete incluida para una alineación precisa de la mesa
- Inglete de 47º a la izquierda y a la derecha para permitir diversos cortes
- Indicador LED, que también funciona como luz de trabajo, proyecta la línea de corte e ilumina el material para mejorar la precisión
- Mango horizontal en forma de "D" para mayor comodidad
- Bloqueo de eje para cambio de hoja con una sola llave
- Freno eléctrico que detiene la hoja en segundos
Especificaciones
- Motor: 120v - 60 Hz 10 A
- Velocidad del motor: 5,350/ min (rpm)
- Puerto de escape de polvo: 1-1.4"
- Diámetro del eje: 5/8 pulgada
- Diámetro de la hoja: 7-1/4 "
- Capacidades de corte:
- Rodapié en posición vertical: 3-3/8”
- Corte ingleteado (nominal) a 90°: 2” x 10”
- Corte ingleteado (nominal) a 45°: 2” x 6”
- Biselado (nominal) a 45°: 2" x 10"
- Moldura corona (45/45°): 3-3/8" *
- Largo del cable: 6 ft
- Peso de la herramienta: 25 lb
- *usando cerca de protección de 2-1/2" de alto por 3/4" de ancho
Incluye
- Ingleteadora deslizable TSS702 con hoja de carburo dentada 40T
- Hoja
- Llave para hoja
- Bolsa recolectora de polvo
- Prensa
- (2) Empuñaduras para transportarla
- Manual del usuario
Reseñas
Ingleteadora deslizable de 7-1/4"
Ingleteadora deslizable de 7-1/4" con calificación sobre 5 por 56.
Calificación de 5 sobre 5 por PatIndpls de A fine saw for this beginner
I’ve been using my saw for about two months and enjoy it more every time I use it. I’m a beginning woodworker, so my projects are fairly simple, but I work comfortably with this and faster and more accurately than a handsaw or circular saw.
The size is great since I have limited garage space, but I can easily move this outside in decent weather.
It was easy to setup out of the box, no adjustments needed. The slider is smooth and it’s easy to adjust for angled cuts, so it’s enough saw for me. The dust collection isn’t perfect, but more goes in the bag than not.
Fecha de publicación: 2019-11-23
Calificación de 5 sobre 5 por RenoJoe de Unbelievably great saw for the price
I bought this saw only because I needed a lightweight chopsaw I could abuse for hardie board siding (cement dust) and use in all weather. As a Carpenter and renovation contractor, I had very low expectations considering the price was under $150. This saw has performed amazingly, and accurately in all conditions and various materials, and I now LOVE it. My only complaint after a month of using it is that in the cold weather the cord has cracked at the point where it has a plastic strap screwed to the end of the rails. Other than that, it’s held up fantastically, and if/when it dies, I’ll buy another one.
Fecha de publicación: 2021-01-25
Calificación de 5 sobre 5 por ashirtale de Great for a beginner doing DIY!
This was my Christmas present to myself and I finally tried it out today. After going thru' the operating instructions to familiarize myself with all the features, I started to experiment with basic straight cuts to sliding cuts to mitred cuts with scrap 2×4s. The dustbag is great, although you still have to shop vac up some sawdust. I would highly recommend this mitre saw to anyone like myself - a retired beginner with time on her hands and DIYs to do!
Fecha de publicación: 2021-02-22
Calificación de 5 sobre 5 por Wolf55 de Easy to use
I bought this about a month ago and I'm glad I did. I had some trim work to do in the basement and this made the job a whole lot easier. The unit did a really nice job on cutting the corners of the trim. No problem in getting them to line up. The unit itself was easy to use, especially for a beginner. Now, I think this unit is really only good for trim or other light cutting. It's not meant to do a 4x4. You'll need a bigger blade for that. Oferall, I'm very satisfied. It did what I bought it for.
Fecha de publicación: 2020-03-04
Calificación de 4 sobre 5 por Kabe0 de Pretty much exactly what I wanted
Bought the saw to do a bunch of trim work. As designs go, it's really easy to set to the right angle, and the handles make it easy to move around. The light helps a lot when cutting at night! Glides well and was easy to install new saw blades.
Two comments I would say that would make it even better would be providing a laser guide, and providing a quick access door at the bottom so that wood chips that happen to fall into the void in the middle of the saw can be removed, otherwise you have to unscrew the top plate to remove the chips manually.
Fecha de publicación: 2021-01-11
Calificación de 3 sobre 5 por Typhoon de Motor is too weak
I bought this saw so I didn't have to carry around my 12" saw as often. Problem is that this saw while having some good features like a light & sliding, the motor is too weak. I get heavy chatter while cutting through 2x, 1x material. I checked the blade thinking it was the issue, but it's not. The dust collection is almost useless, (as most are), but this bag is too porous & what ever small amount of saw dust it collects tend to sift out with transport.
I'm a very loyal purchaser of Ryobi tools but this one isn't what I hoped it would be.
Fecha de publicación: 2020-07-10
Calificación de 5 sobre 5 por Railway Bob de Great Sliding Compound Mitre Saw At a Great Price!
For the last 10 years, I've had a Makita 12' double sliding, double compound mitre saw on a wheel-about stand. Great saw. But quite a bit heavy trucking it around and trying to bring it to a standing position. Good opportunity for a hernia at my young 75 years of age.
Then I saw the ad for the Ryobi 7 1/4" sliding mitre saw for only $138 ... which I got for $118 two weeks later! How could I lose! At only 35 lbs which I could easily carry with the two handles ... a real steal!
On visiting the Home Depot to take a look, the saw was coupled to the Ryobi mitre saw stand at $158. Those simple fold-up legs, the light weight, and the simple saw stand attachment system ... how could I lose!!??
So I bought both the mitre saw and the mitre saw stand.. Both are easy to set up and disassemble to put away. No more hernias. |
As for cutting wood, it zipped through some 1"x 4" pine with a nice clean finish. Easy to set up. Easy to put away.
Fecha de publicación: 2021-04-18
Calificación de 5 sobre 5 por beth242 de Love this saw!
I bought this on sale before Christmas for $98. I have been so very happy with it. Cuts beautifully and it's not super heavy to move around. For the home handyman (or in my case, handywoman!) it's perfect!
Fecha de publicación: 2020-01-25
