Guía ajustable para trabajos de ensamblado. Superficie de la mesa en MDF laminado de 32" x 16" x 1". Guía sin holgura revestida con MDF. Riel en forma de T de aluminio extruido.
- Tamaño de la mesa: 16" x 32" x 1"
- Longitud de la guía: 28"
- Peso: 28 lb
- Interruptor: 120 V, AC únicamente, 15 A
- Salida: doble
- Para utilizar con las siguientes fresadoras:
- Modelos Bosch®: 1617, 1617 EVS, 1617 EVSPK
- Modelos Craftsman®: 17504, 17505, 17506, 17508, 17510, 17511, 17515, 17517, 17533 combo, 24833 combo, 27500, 26921
- Modelos Hitachi®: M12V, KM12VC
- Modelos Makita®: RF1101, RP1101, RF1101K
- Modelos Milwaukee®: 5615-20, 5616-20
- Modelos Porter Cable®: 693LRPK, 694PK, 694VK, 892, 893PK, 7529, 8529
- Modelo RIDGID®: R2930
- Modelos RYOBI®: R160, R161K, R162K, R163K, R165U, R175, RE175, RE180PL/PL1
- Modelos Skil®: 1810, 1825
- Calibre de inglete (1 unidad)
- Placas de garganta (5 unidades)
- Pasador de partida (1 unidad)
- Paquetes de ferretería (3 unidades) para ajustar la fresadora a la mesa
- Tablero acolchado
Mesa para fresadora para nivel intermedio
Mesa para fresadora para nivel intermedio con calificación sobre 5 por 62.
Calificación de 5 sobre 5 por Franko B de Why did I wait that long to get the router table I bought this about 6-8 weeks ago to elp on shiplack I am putting on ceiling in my A-frame to get away from the white walls. Some of the edges on top of A-frame are not at right angle to glue/nail the pieces in and used router for putting camfers at bottom and they contour to the ceiling to give it a crisp straight look. Used again for floor/wall mouldings in house to cut out a recess to fit the door frame pieces in- Wit a few different bits you can do amazing things on this router table. All my new power tools are Ryobi- just bought a saw table for rest of projects-- floor- ... These tools have never let me down.
Fecha de publicación: 2020-10-20
Calificación de 4 sobre 5 por gandalf de Very nice router table I bought this router table a few weeks ago, and am pleased that it is able to accommodate my older Craftsman router (model 174921). I am still waiting for the paint to dry on a cabinet that I built to mount the table on, so I have only a little experience using it. It seems quite well made, and I am happy with my purchase. The only complaint that I have is that the screws that came with the table to use for mounting the router are not the advertised size. My router requires 8-32 x 5/8" screws. Though the manual states that there are 8-32 x 5/8" screws included, the 8-32 screws included are actually 7/8" long, and bottomed out in my router base before pulling the router up tight to the table insert. I contacted Ryobi, and they sent me two packages, both labeled 8-32 x 5/8". They also are 7/8" long (see the photo). The table is great, and the need to buy some different screws minor, but I do think that Ryobi should know that the screws being supplied, regardless of their labeling, are not the stated length.
Fecha de publicación: 2020-04-27
Calificación de 3 sobre 5 por Garymacd57 de Solid table, but... Table construction is much better than the Craftsman Router Table I just replaced. I have this paired with the Ryobi plunge router. My greatest challenge with this combination is the difficulty changing bits and heights. I actually have to either move the fence and lose my settings then pull the router out of the table or turn the table on its side to see what I am doing and then cannot see the height of the cutter. It’s a frustrating start to my new projects. My worst experience with Ryobi tools.
Fecha de publicación: 2020-04-15
Calificación de 5 sobre 5 por 3CBC3 de Very pleased with this router table I found the assembly easy and straight forward. The instructions were easy to read. Took a little over 90 minutes to assemble, taking my time. As with most tools and projects with MDF, the screws cannot be over-tightened. The manual on their website lists the routers that will fit this table. I had no problems leveling the router plate as long as the screws are not so tight as to warp the plate. Overall I am very pleased with this product.
Fecha de publicación: 2019-02-11
Calificación de 4 sobre 5 por Jay Dave de Very User Friendly I have completed multiple tongue and groove projects with this table with alot of ease. Very easy to set up and the fence works really well for adjustments. Vacuum dust collection is great as well with only a shop vac hooked up to it. The only issue I have encountered is the mounting plate hardware does tend loosen over time causing the mounting plate to get thrown out of level, which is a bit frustrating when in the middle of a piece and your stock gets hung on the lip of the plate. With some minor adjustments and checking everything prior to starting a project this is a great table for the price. Not to mention, if you're a Ryobi fan it looks great in the shop with all the other tools to match.
Fecha de publicación: 2021-01-18
Calificación de 4 sobre 5 por Cline65 de Great starter table I bought this to incorporate into my workbench, along with my table saw and sliding miter saw.
Fecha de publicación: 2020-03-26
Calificación de 5 sobre 5 por kublakahn119 de Easy Set Up, Great Features I'm extremely happy with my Ryobi router table. It's large size made it easy to mount my Bosch router, and I was surprised to see how quickly I could get to work after opening the box. I've used it at least a dozen times already, and it's been smooth sailing all the way. This table has all the features more expensive tables have, and is by far the best bang for your buck.
Fecha de publicación: 2019-05-07
Calificación de 4 sobre 5 por Bill57 de GREAT TOOL!!!! I've only used this about a half dozen times and I really like the features of the miter and feather fence. The most confusing part was finding a router that would bolt up. Most of the ones listed on the box were actually adapter plates. I can tell you that the Ryobi palm router will not work and is probably to light duty for the table. Changing bits requires turning the table 90 degrees, at least that's the easiest way I could find. Reaching around to hold the lock was awkward but manageable.
Fecha de publicación: 2021-01-18